AddOn Studio

WoW:Migrate WTF script

Revision as of 04:48, 15 August 2023 by Move page script (talk | contribs) (Move page script moved page Migrate WTF script to Migrate WTF script without leaving a redirect)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

IntoductionEdit

The following script allows you to change the realm / character names within your WTF. It is used in the following situations:

  • Copying your WTF to the test realm installation
  • Moving your characters from one realm to another
  • Forced to rename your character

The script was developed and tested on a Mac, however it can be run on Linux as-is and on Windows via cygwin.

UsageEdit

The script can be stored and run from anywhere.

migrateWTF.sh -a <account name> [-s <source dir>] [-d <destination dir>] -f <realm from> -t <realm to> {-o <old name> -n <new name>}

-a <account name> Name of the account in capitals; this is the directory under World of Warcraft/WTF/Account
-s <source dir> (optional) Source installation directory, defaults to /Applications/World of Warcraft
-d <destination dir> (optional) Destination installation directory, defaults to /Applications/World of Warcraft/WoWTest
-f <realm from> Realm you are migrating from; remember to quote it if it contains special characters
-f <realm to> Realm you are migrating to; remember to quote it if it contains special characters
-o <old name> (optional, repeats) Character name on source realm
-o <new name> (optional, repeats) Character name on destination realm

-o and -n must be specified in pairs; zero or many -o -n pairs may be specified.

Additional InformationEdit

To migrate from one realm to another within the same WoW installation i.e. you have moved realms, you should specify the same -s and -d. The old configuration will be backed up to: 

World of Warcraft/WTF.beforemigration

LimitationsEdit

Only one account may be migrated.

Only one realm may be migrated; you cannot have multiple from or to realms.

ExamplesEdit

Migration from your realm to the test realm without renaming any charactersEdit

./migrateWTF.sh -a NEMES11 -s "/Applications/World of Warcraft" -d "/Applications/World of Warcraft/WoWTest" -f "Dath'Remar" -t "Test Server (US PVE)"

Migration from one realm to another, renaming two toonsEdit

./migrateWTF.sh -a NEMES11 -s "/Applications/World of Warcraft" -d "/Applications/World of Warcraft" -f "Thunderhead" -t "Privybush" -o Nemes -n Nemesy -o Rhad -n Dhar

migrateWTF.shEdit

#!/bin/sh

SRC="/Applications/World of Warcraft"
DST="${SRC}/WoWTest"

NUM_OLD=0
NUM_NEW=0

# print the usage message then exit with error
usage()
{
    echo
    echo "${0#*/} by nemes"
    echo
    echo "wiki: http://www.wowwiki.com/MigrateWTFscript"
    echo
    echo "usage: ${0#*/} -a <account name> [-s <source dir>] [-d <destination dir>] -f <realm from> -t <realm to> {-o <old name> -n <new name>}"
    echo "  -a account name in caps"
    echo "  -s source directory of the WOW install, defaults to /Applications/World of Warcraft"
    echo "  -d destination directory of the WOW install, defaults to /Applications/World of Warcraft/WoWTest"
    echo "  -f realm migrating from"
    echo "  -t realm migrating to"
    echo "  -o character name on source"
    echo "  -n character name on destination"
    echo
    echo "-o and -n must be specified in pairs; zero or many -o -n pairs may be specified"
    echo "when -s and -d are the same, the exiting configuration will be backed up to WTF.beforemigration"
    echo
    echo "e.g.: to migrate from your regular server to the test realm, renaming two characters:"
    echo "  ./${0#*/} -a NEMES11 -s \"/Applications/World of Warcraft\" -d \"/Applications/World of Warcraft/WoWTest\" -f \"Dath'Remar\" -t \"Test Server (US PVE)\" -o Nemes -n Nemesey -o Rhadamanth -n Rhad"
    echo
    echo "e.g.: to migrate from Thunderhead to Privybush without renaming any characters:"
    echo "  ./${0#*/} -a NEMES11 -s \"/Applications/World of Warcraft\" -d \"/Applications/World of Warcraft\" -f \"Thunderhead\" -t \"Privybush\""
    echo
    exit 1
}

# check the return code (first argument) and if it's not success, print the second argument and exit with error
chkrc()
{
    RC=${1}
    MSG=${2}
    if [[ ${RC} -ne 0 ]]; then
        echo "$MSG"
        echo "return code: ${RC}"
        exit 1
    fi
}

# execute the sed script (first argument) on each lua file in the current directory
modifyLUA()
{
    SCRIPT=${1}

    PRINTED=0
    echo "Modifying lua files in ${PWD}:"
    LUA_FILE_LIST=$(ls *.lua 2>&1 > /dev/null)
    if [[ ${?} -eq 0 ]]; then
        for F in *.lua; do
            if [[ ${PRINTED} -gt 2 ]]; then
                PRINTED=0
                printf "\n"
            else
                PRINTED=$((${PRINTED}+1))
            fi
            printf "\t${F}"
            sed -f "${SCRIPT}" "${F}" > "${F}.new"
            chkrc ${?} "\nError executing sed on ${F}, with command file ${SCRIPT}, exiting"
            mv "${F}.new" "${F}"
        done
        printf "\n"
    fi
}

# parse the command line options
while getopts ":s:d:f:t:o:n:a:" OPT; do
    case ${OPT} in
    a) ACCT=${OPTARG} ;;
    s) SRC=${OPTARG} ;;
    d) DST=${OPTARG} ;;
    f) FROM=${OPTARG} ;;
    t) TO=${OPTARG} ;;
    o) OLD[${NUM_OLD}]=${OPTARG}; NUM_OLD=$((${NUM_OLD}+1)) ;;
    n) NEW[${NUM_NEW}]=${OPTARG}; NUM_NEW=$((${NUM_NEW}+1)) ;;
    \?) usage
    esac
done
shift $((${OPTIND} - 1))

# check from and to for existence
if [[ ${FROM} == "" ]]; then
    usage
fi
if [[ ${TO} == "" ]]; then
    usage
fi

# check the source and dest for existence
if [[ ! -d "${SRC}" ]]; then
    echo "${SRC} does not exist, exiting"
    exit 1
fi
if [[ ! -d "${DST}" ]]; then
    echo "${DST} does not exist, exiting"
    exit 1
fi

# check the account for existence
if [[ ${ACCT} == "" ]]; then
    usage
fi
if [[ ! -d "${SRC}/WTF/Account/${ACCT}" ]]; then
    echo "${SRC}/WTF/Account/${ACCT} does not exist, exiting"
    exit 1
fi

# check that the same number of old/new names are specified
if [[ ${NUM_OLD} -ne ${NUM_NEW} ]]; then
    echo "Different number of old and new character names specified, exiting"
    exit 1
fi

if [[ ${SRC} == ${DST} ]]; then
    SINGLEINSTALL=1
else
    SINGLEINSTALL=0
fi

# tell the user what we're going to do and give them a chance to stop
echo
echo "========================================"
if [[ ${SINGLEINSTALL} -eq 1 ]]; then
    echo "Performing migration for installation:"
    echo " ${SRC}"
    echo
    echo "Existing configuration will be stored in:"
    echo " ${SRC}/WTF.beforemigration"
else
    echo "Preparing to migrate WTF from:"
    echo " ${SRC}/WTF"
    echo "to"
    echo " ${DST}/WTF"
fi
echo
echo "Changes will be made to the World of Warcraft account: ${ACCT}"
echo
echo "Realm name will be changed:"
echo " ${FROM} -> ${TO}"
echo
echo "Characters renamed:"
I=0
while [[ ${I} -lt ${NUM_OLD} ]]; do
    echo " ${OLD[I]} -> ${NEW[I]}"
    I=$((${I}+1))
done
echo "========================================"
echo
echo "Press any key to continue"
read

# create the temporary directory for a single installation
if [[ ${SINGLEINSTALL} -eq 1 ]]; then
    DST="${SRC}/migtemp"
    mkdir "${DST}"
    chkrc ${?} "Error during creation of ${DST}, exiting"
fi

# copy the entire WTF folder, obliterating what was there
if [[ -d "${DST}/WTF" ]]; then
    echo "Removing ${DST}/WTF"
    rm -rf "${DST}/WTF"
    chkrc ${?} "Error during remove, exiting"
fi
echo "Copying ${SRC}/WTF/config.wtf, ${SRC}/WTF/Account to ${DST}/WTF"
mkdir "${DST}/WTF"
cp -r "${SRC}/WTF/config.wtf" "${SRC}/WTF/Account" "${DST}/WTF"
chkrc ${?} "Error during copy, exiting"

# change the realm folder name
echo "Changing realm folder name from ${FROM} to ${TO}"
mv "${DST}/WTF/Account/${ACCT}/${FROM}" "${DST}/WTF/Account/${ACCT}/${TO}"
chkrc ${?} "Error during rename, exiting"

# change the character folder name
I=0
while [[ ${I} -lt ${NUM_OLD} ]]; do
    echo "Changing character folder name from ${OLD[I]} to ${NEW[I]}"
    mv "${DST}/WTF/Account/${ACCT}/${TO}/${OLD[I]}" "${DST}/WTF/Account/${ACCT}/${TO}/${NEW[I]}"
    chkrc ${?} "Error during rename, exiting"
    I=$((${I}+1))
done

# build a sed command file
SED_FILE="${DST}/WTF/sed_cmd.txt"
echo "s/\"${FROM}/\"${TO}/g" >> ${SED_FILE}
echo "s/${FROM}\"/${TO}\"/g" >> ${SED_FILE}
I=0
while [[ ${I} -lt ${NUM_OLD} ]]; do
    echo "s/\"${OLD[I]}/\"${NEW[I]}/g" >> ${SED_FILE}
    echo "s/${OLD[I]}\"/${NEW[I]}\"/g" >> ${SED_FILE}
    echo "s/\"char\/${OLD[I]}/\"char\/${NEW[I]}/g" >> ${SED_FILE}
    I=$((${I}+1))
done

# perform replacements on each lua file in SavedVariables
cd "${DST}/WTF/Account/${ACCT}/SavedVariables"
modifyLUA "${SED_FILE}"

# perform replacements for each character in the realm
cd "${DST}/WTF/Account/${ACCT}/${TO}"
for D in *; do
    if [[ -d ${D} ]]; then
        cd ${D}
        modifyLUA "${SED_FILE}"
        if [[ -d SavedVariables ]]; then
            cd SavedVariables
            modifyLUA "${SED_FILE}"
            cd ..
        fi
        cd ..
    fi
done

# create the temporary directory for a single installation
if [[ ${SINGLEINSTALL} -eq 1 ]]; then
    echo "Moving orignal WTF to ${SRC}/WTF.beforemigration"
    mv "${SRC}/WTF" "${SRC}/WTF.beforemigration"
    chkrc ${?} "Error during rename, exiting"
    echo "Moving new WTF to ${SRC}/WTF"
    mv "${DST}/WTF" "${SRC}"
    chkrc ${?} "Error during move, exiting"
    rmdir "${DST}"
    chkrc ${?} "Error during removal of ${DST}, exiting"
fi
Retrieved from "https://addonstudio.org/mw/index.php?title=WoW:Migrate_WTF_script&oldid=20583"